Ladda ner dokument () av 20
Normprodukter och effektbrytare

xEffect Combined RCD/MCB Device, FRBm6/M, 1+N, 2, 3 and 3+N-pole

This residual current operated circuit breaker with integrated overcurrent protection is a high-quality residual current circuit breaker and miniature circuit breaker combination with line voltage-independent tripping and a wide variety of rated tripping currents. 

A tripping by a fault current is signalled by the blue display, white indicates that either the MCB part was "tripped" or that it was switched off. It is compatible with busbars. A twin-purpose terminal (lift/open-mouthed) is available for easy and quick mounting. 

Rated currents
up to 40 A
compliant to
IEC/EN 61009
Rated breaking capacity
6 or 10 kA

Viktiga egenskaper

  • High-quality RCD/MCB device combination
  • Line voltage-independent tripping
  • Contact position indicator red – green
  • Fault current tripping indicator white – blue
  • Compatibility to standard busbar
  • Twin-purpose terminal (lift/open-mouthed) above and below
  • Busbar positioning options for line and load terminals
  • Free terminal space despite installed busbars
  • Guide for secure terminal connection
  • 3-position DIN rail clip, allows easy removal from existing busbar system 
  • Wide range of accessories suitable for subsequent installation
  • Reduction of nuisance tripping (type F, G, or G/A) thanks to time delayed tripping and increased current withstand capability >3 kA 
  • Rated breaking capacity, rated currents and tripping characteristics depend on the type and pole configuration of the RCBO
  • FRC...RT for ring cable lug connections

IEC Standard quality design

Eaton´s RCBOs adhere to IEC / EN 61009 – a standard covering residual current operated circuit-breakers with integral overcurrent protection (RCBOs) for fixed installation up to 125 A.
All requirements according to the product standards are fulfilled and applicable additional standards are printed onto the device itself.

Suitable RCD/MCB types for all contingencies

  • Type A: Protects against special forms of residual pulsating DC which have not been smoothed.
  • Type -Super A: High reliability against unwanted tripping. Compulsory for any circuit where personal injury or damage to property may occur in case of unwanted tripping.
  • Type AC: This type only reliably detects AC fault currents.
  • Type G: High reliability against unwanted tripping. Compulsory for any circuit where personal injury or damage to property may occur in case of unwanted tripping.
  • Type F: Higher load rating with DC residual currents up to 10 mA. Increased protection in applications with 1-phase frequency converter due to the detection of mixed frequencies up to 1 kHz.

All in one device

Eaton's high quality standard guarantees comprehensive personal- and equipment protection by combining the functionalities of a residual current circuit breaker with those of a miniature circuit breaker all in one device. Spend less time and effort wiring while still protecting the system against overload, short circuit and residual current. Using Eaton's line of RCBOs, your electrical system will increase in safety and reliability.

Maximum safety in railway applications

The xEffect range of protective switchgear also ensures highest standards of safety in railway applications. Thanks to compliance with specific standards such as IEC 61373 (Rolling stock equipment – Shock and vibration) and EN 45545-2 (fire protection of railway vehicles), the devices provide maximum safety and performance in rolling stock applications. In addition to standard switchgear, we also offer a wide range of MCBs and RCDs for the connection of ring cable lugs in railway applications.

Type F for industrial applications and machinery

Outages of machines are costly and finding the reason can be problematic. Often the reason can be that modern machines have modern loads built into them. Mains filters can cause disturbances to the incoming line and can change the behavior of the RCD in series. More often, loads have single phase inverters built in. High frequency- and extended DC-immunity incorporated in a protection device with high surge current proofness enables the next generation of machines to become safe above the standard.

Online configurator - design your own customized configurations

The xComfort KLV series and our switching and protection devices are based on a modular design so that you can assemble any combination you need. In addition to a number of standard pre-wired distribution boards, Eaton also supplies customized configurations on request. If you are not yet sure which type of distribution board is the right fit for you, simply fill in our configurator with ordering function.
Specifikationer
Markera skillnader
Visa endast skillnader
Dölj tomma funktioner
Nedladdningslänkar
X
Download Close