Bilden är representativ

169099 - PowerXL DA1 advanced variable frequency drives

169099
Modellkod: DA1-32024FB-A20C

Eaton DA1 Variable frequency drive, 230 V AC, 3-phase, 24 A, 5.5 kW, IP20/NEMA 0, Radio interference suppression filter, 7-digital display assembly

Produktspecifikationer

Kontakta vårt försäljningsteam

Specifikationer Resurser Support

General specifications

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	169099
EAN	4015081655830
Product Length/Depth	204 mm
Product Height	273 mm
Product Width	131 mm
Product Weight	3.5 kg
Certifications	CSA-C22.2 No. 14 IEC/EN61800-3 IEC/EN 61800-3 RoHS, ISO 9001 UL report applies to both US and Canada CUL EAC UL UL File No.: E172143 RCM Specification for general requirements: IEC/EN 61800-2 CE Certified by UL for use in Canada IEC/EN61800-5 Safety: EN 61800-5-1: 2003 UkrSEPRO UL 508C UL Category Control No.: NMMS, NMMS7
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
Model Code	DA1-32024FB-A20C

General

Cable length	300 m, unscreened, with motor choke, maximum permissible, Motor feeder C2 ≤ 5 m, Radio interference level, maximum motor cable length 150 m, unscreened, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder C3 ≤ 25 m, Radio interference level, maximum motor cable length 100 m, screened, maximum permissible, Motor feeder
Communication interface	EtherCAT, optional SmartWire-DT, optional DeviceNet, optional PROFIBUS, optional Ethernet IP, optional Modbus RTU, built in PROFINET, optional OP-Bus (RS485), built in CANopen®, built in Modbus-TCP, optional
Connection to SmartWire-DT	Yes In conjunction with DX-NET-SWD1 SmartWire DT module
Degree of protection	IP20 NEMA Other
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Fitted with:	Radio interference suppression filter PC connection Brake chopper Internal DC link IGBT inverter Breaking resistance Control unit 7-digital display assembly Additional PCB protection
Frame size	FS3
Functions	4-quadrant operation possible
Mounting position	Vertical
Product Category	Variable frequency drives
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol	MODBUS PROFIBUS CAN PROFINET IO DeviceNet EtherNet/IP Other bus systems TCP/IP
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Suitable for	Branch circuits, (UL/CSA)
Radio interference class	C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments

Climatic environmental conditions

Altitude	Max. 4000 m Above 1000 m with 1 % derating per 100 m Max. 1000 m
Ambient operating temperature - min	-10 °C
Ambient operating temperature - max	50 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient operating temperature at 150% overload - max	50 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	60 °C
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion

Main circuit

Efficiency	96.9 % (η)
Heat dissipation at current/speed	117 W at 25% current and 50% speed 125 W at 50% current and 0% speed 151 W at 50% current and 50% speed 171 W at 50% current and 90% speed 201 W at 100% current and 0% speed 229 W at 100% current and 50% speed 257 W at 100% current and 90% speed 94 W at 25% current and 0% speed
Input current ILN at 150% overload	26.4 A
Leakage current at ground IPE - max	0.93 mA
Mains switch-on frequency	Maximum of one time every 30 seconds
Mains voltage - min	200 V
Mains voltage - max	240 V
Operating mode	U/f control Sensorless vector control (SLV) Optional: Vector control with feedback (CLV) Speed control with slip compensation
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Output voltage (U2)	230 V AC, 3-phase 240 V AC, 3-phase
Overload current IL at 150% overload	36 A
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Rated frequency - min	48 Hz
Rated frequency - max	62 Hz
Rated operational current (Ie) at 150% overload	24 A
Rated operational power at 220/230 V, 50 Hz, 1-phase	5.5 kW
Rated operational voltage	230 V AC, 3-phase 240 V AC, 3-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection rating	40 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Supply frequency	50/60 Hz
Switching frequency	16 kHz, 4 - 16 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type	AC supply systems with earthed center point
Voltage rating - max	240 VAC

Motor rating

Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload	22 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload	19.6 A
Assigned motor power at 230/240 V, 60 Hz, 1-phase	7.5 HP

Apparent power

Apparent power at 230 V	9.56 kVA
Apparent power at 240 V	9.98 kVA

Braking function

Braking resistance	20 Ω
Braking torque	Max. 100 % of rated operational current Ie, variable, DC - Main circuit Max. 100 % of rated operational current Ie with external braking resistor - Main circuit Max. 30 % MN, Standard - Main circuit
Switch-on threshold for the braking transistor	390 VDC

Control circuit

Number of inputs (analog)	2
Number of inputs (digital)	5
Number of outputs (analog)	2
Number of outputs (digital)	2
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)

Design verification

Equipment heat dissipation, current-dependent Pvid	170.5 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	24 A
Static heat dissipation, non-current-dependent Pvs	0 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Broschyrer

eaton-powerxl-variable-frequency-drives-dc1-da1-brochure-br040001en-en-us.pdf

Bruksanvisningar

Installation videos

Video PowerXL DA1

Ritningar

Observera: Om fil(er) saknas från .zip nedladdningen stöds filtypen inte av massnedladdning.

Kontakta teknisk support

Ring teknisk support

08-598 940 50

Konfigurera din produkt

Utbildning

Garanti

Villkor

Designed to work together

Discover other Eaton products and accessories built to enhance this product.

Ange din ort, län eller postnummer eller BuyNow.GeolocationIconAlt

Lokalisera mig

Visa platser som erbjuder:

Upphämtning av produkten

Beställ online och leverera produkten

Distributör	Tillgänglig kv.	Platstyp	BuyNow.TableColLabelLink

Eaton är ett intelligent energihanteringsföretag som verkar för att förbättra livskvaliteten och miljön för människor globalt. Vi styrs av vårt engagemang för att göra affärer på rätt sätt, att verka hållbart och att hjälpa våra kunder hantera energi ─ idag och långt in i framtiden. Genom att dra nytta av globala tillväxttrender för elektrifiering och digitalisering påskyndar vi planetens övergång till förnybar energi och bidrar till att lösa världens mest akuta energihanteringsutmaningar.

169099 Modellkod: DA1-32024FB-A20C