Bilden är representativ

169391 - PowerXL DA1 advanced variable frequency drives

169391
Modellkod: DA1-34030FB-B55C

Eaton DA1 Variable frequency drive, 400 V AC, 3-phase, 30 A, 15 kW, 20HP, IP55/NEMA 12, Radio interference suppression filter, OLED display.

Produktspecifikationer

Kontakta vårt försäljningsteam

Specifikationer Resurser

General specifications

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	169391
EAN	4015081658343
Product Length/Depth	240 mm
Product Height	450 mm
Product Width	173 mm
Product Weight	11.5 kg
Certifications	UL report applies to both US and Canada IEC/EN61800-3 CE CSA-C22.2 No. 14 Certified by UL for use in Canada CUL EAC IEC/EN61800-5 UL Category Control No.: NMMS, NMMS7 RoHS, ISO 9001 DNV UL 508C RCM UkrSEPRO UL File No.: E172143 IEC/EN 61800-3 Specification for general requirements: IEC/EN 61800-2 UL Safety: EN 61800-5-1: 2003
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
Model Code	DA1-34030FB-B55C

General

Cable length	C2 ≤ 5 m, Radio interference level, maximum motor cable length C3 ≤ 25 m, Radio interference level, maximum motor cable length 100 m, screened, maximum permissible, Motor feeder 150 m, unscreened, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder
Communication interface	DeviceNet, optional Modbus-TCP, optional EtherCAT, optional SmartWire-DT, optional OP-Bus (RS485), built in PROFIBUS, optional CANopen®, built in Modbus RTU, built in Ethernet IP, optional PROFINET, optional
Connection to SmartWire-DT	In conjunction with DX-NET-SWD1 SmartWire DT module Yes
Degree of protection	NEMA 12 IP55
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Fitted with:	Control unit Additional PCB protection Internal DC link PC connection Radio interference suppression filter Brake chopper OLED display Breaking resistance IGBT inverter
Frame size	FS4
Functions	4-quadrant operation possible
Mounting position	Vertical
Product Category	Variable frequency drives
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol	MODBUS EtherNet/IP DeviceNet PROFINET IO PROFIBUS Other bus systems CAN TCP/IP
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Suitable for	Branch circuits, (UL/CSA)
Radio interference class	C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments

Climatic environmental conditions

Altitude	Above 1000 m with 1 % derating per 100 m Max. 1000 m Max. 4000 m
Ambient operating temperature - min	-10 °C
Ambient operating temperature - max	40 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient operating temperature at 150% overload - max	40 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	60 °C
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion

Main circuit

Efficiency	97.5 % (η)
Heat dissipation at current/speed	136 W at 25% current and 0% speed 165 W at 25% current and 50% speed 165 W at 50% current and 0% speed 194 W at 50% current and 50% speed 216 W at 50% current and 90% speed 278 W at 100% current and 0% speed 323 W at 100% current and 50% speed 359 W at 100% current and 90% speed
Input current ILN at 150% overload	34.2 A
Leakage current at ground IPE - max	2.47 mA
Mains switch-on frequency	Maximum of one time every 30 seconds
Mains voltage - min	380 V
Mains voltage - max	480 V
Operating mode	Sensorless vector control (SLV) U/f control Optional: Vector control with feedback (CLV) Speed control with slip compensation
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Output voltage (U2)	400 V AC, 3-phase 480 V AC, 3-phase
Overload current IL at 150% overload	45 A
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Rated frequency - min	48 Hz
Rated frequency - max	62 Hz
Rated operational current (Ie) at 150% overload	30 A
Rated operational power at 380/400 V, 50 Hz, 3-phase	15 kW
Rated operational voltage	480 V AC, 3-phase 400 V AC, 3-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection rating	50 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Supply frequency	50/60 Hz
Switching frequency	8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type	AC supply systems with earthed center point
Voltage rating - max	480 VAC

Motor rating

Assigned motor current IM at 400 V, 50 Hz, 150% overload	29.3 A
Assigned motor current IM at 440 - 480 V, 60 Hz, 150% overload	27 A
Assigned motor power at 460/480 V, 60 Hz, 3-phase	20 HP

Apparent power

Apparent power at 400 V	20.78 kVA
Apparent power at 480 V	24.94 kVA

Braking function

Braking resistance	22 Ω
Braking torque	Max. 30 % MN, Standard - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Switch-on threshold for the braking transistor	780 VDC

Control circuit

Number of inputs (analog)	2
Number of inputs (digital)	5
Number of outputs (analog)	2
Number of outputs (digital)	2
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)

Design verification

Equipment heat dissipation, current-dependent Pvid	375 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	30 A
Static heat dissipation, non-current-dependent Pvs	0 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Broschyrer

eaton-powerxl-variable-frequency-drives-dc1-da1-brochure-br040001en-en-us.pdf

Bruksanvisningar

Installation videos

Video PowerXL DA1

Ritningar

Observera: Om fil(er) saknas från .zip nedladdningen stöds filtypen inte av massnedladdning.

Designed to work together

Discover other Eaton products and accessories built to enhance this product.

Ange din ort, län eller postnummer eller BuyNow.GeolocationIconAlt

Lokalisera mig

Visa platser som erbjuder:

Upphämtning av produkten

Beställ online och leverera produkten

Distributör	Tillgänglig kv.	Platstyp	BuyNow.TableColLabelLink

Eaton är ett intelligent energihanteringsföretag som verkar för att förbättra livskvaliteten och miljön för människor globalt. Vi styrs av vårt engagemang för att göra affärer på rätt sätt, att verka hållbart och att hjälpa våra kunder hantera energi ─ idag och långt in i framtiden. Genom att dra nytta av globala tillväxttrender för elektrifiering och digitalisering påskyndar vi planetens övergång till förnybar energi och bidrar till att lösa världens mest akuta energihanteringsutmaningar.

169391 Modellkod: DA1-34030FB-B55C